Sliding and climbing ramp for Ette Tete frames and cube
All photos are the maker's own.
Inv. no. ETT-RAMP
- Maker
- Ette Tete
- Ramp length
- 117 cm
- Ramp width
- 40 cm
- Primary material
- Birch plywood
- Finish
- Water-based UV varnish
- EAN
- 4752193000317
Final price incl. VAT. Delivery €5.90, €39.10 to go for free delivery.
Advice, warranty and returns are handled by us.
Your child slides down one side of the ramp and climbs or crawls up the other. The ramp measures 117 × 40 cm and attaches to the rods of an Ette Tete climbing frame or play cube with four D-ring straps; it has side edges. Each frame can carry two ramps, one on each side, and a ramp can join two frames, or a frame and the cube, into a larger play set at the angle you choose. The ramp weighs 5.78 kg and is made of birch plywood with a water-based UV varnish. Age recommended by the maker: from 12 months. It is secured with the straps included, following the maker's instructions.
| Ramp length | 117 cm |
| Ramp width | 40 cm |
| Primary material | Birch plywood |
| Finish | Water-based UV varnish |
| Warranty | 24 months |
The whole room in one order
Ette Tete makes this piece. Here you order it together with Montessori materials in one basket, with advice before and after you buy. We also invoice companies, nurseries and kindergartens.
Furnishing a whole child's room? Send us the sizes and your child's age, and we will suggest what goes together.
Norbert Kovalčín, founder of Faborino · write to him
When will it arrive?
In Stock. Delivery in 5 to 8 working days.
What if it arrives damaged?
Take a photo of the parcel and the damage and write to us. We handle the rest.
Product safety
Manufacturer: Ette Tete, "Barži", Tīnūžu pagasts, LV-5015 Ogres novads, Latvia
- Warning
- For domestic use only. Adult assembly required.
- Safety instructions
- Never leave your child unattended with the ramp. Attach it only to the slope positions of the climbing frame or to the climbing cube it is intended for, and always secure it with the safety straps as shown in the instructions; the straps must be tight. Use the side with steps for climbing and the smooth side for sliding. Place the frame or cube with the ramp on a level surface at least 2 m from any obstruction, never on concrete, asphalt or another hard surface. Before use check that the ramp has no cracks, the straps are not torn or damaged, and the surface is dry.
- Recommended age
- from 12 months
- CE marking
- Yes, Toy Safety Directive 2009/48/EC
- Standards stated by the maker
- EN 71-1, EN 71-2, EN 71-3, EN 71-8, EN 71-9
- EU declaration of conformity
- Open the maker's PDF
Sliding and climbing ramp for Ette Tete frames and cube